[ROM][WIP] CM10.1 Badadroid Custom Rom v1.1 | Android Jellybean 4.2.2 for Wave 1 and Wave 2

FEATURES
Android 4.2.2
CM sources of 14.08.2013
Updated to linux kernel version 3.0.86
272 MB RAM
F4k 720p patch for bigmem kernels (Video Fix)
New key Mapping:
- call key as CALL, Middle as HOME, endcall as ENDCALL
- Long press ENDCALL will show power menu
- lock key as POWER, framework patch is not yet ported
- Navigation Bar activated
- PIE control can be activated with Expanded desktop


GAPPS
http://goo.im/gapps/gapps-jb-20130301-signed.zip full gapps
flash through CWM (recovery)

KNOWN BUGS (what doesn't work):
Most of the modem (GSM/GPRS) functionallity:
- Mobile data(3G/2G)
- Audio in Calls (you can calls but you have no good voice from both sides), so only call notification is good
- SMS bug on some phones
Network indicator is full all time
GPS
Bluetooth on Wave 2
Some problems with screen calibration on Wave 2
Don't leave phone charging without supervising - if it gets enormously hot, disconnect it - this can literally blow up battery as there is no overheating protection yet. Do not leave it connected on 100% - it'll discharge by 1% all the time, and then recharge, what's very unhealthy for battery.
Maybe something else, what i forgot

INSTALLATION
Bada 2.0 is required

1. Enter Bada Settings->General->Memory and make sure you have at least:
   370MB of free "System" memory
   160MB of free "User" memory
   400MB of free "Applications" memory
2. Download BOOTFILES, armlinux_boot for your device from http://goo.im/devs/Rebellos/wave (please pay attention if it's S8500 or S8530 BOOTFILES and FOTA you're choosing!):
3. Download ROM: http://www.multiupload.nl/H0THJFGQAQ
4. Start Bada.
5. Extract zImage from zip and copy it to the Bada's User partition (the one about 390MB big).
6. Copy whole .zip to the Bada's User partition.
7. Flash BOOTFILES and FOTA using Multiloader.
8. Reboot the phone holding Power and Call key.
9. FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.
10. Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.
11. CWM Recovery starts, pick:
    - install zip from sdcard
    - choose zip from sdcard
    - cm-10.1-wave-<release id>.zip
    - Yes - install
12. Reboot holding the Power key

You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.
Do not remove zImage file.
Normal bootup is available using Power+Call keys
CWM Recovery mode is available using Power+Volume Up keys
CWM Flashing does overwrite zImage. So every next update you can just flash .zip through CWM.

HOW TO UNINSTALL
Follow the steps there: http://forum.xda-developers.com/show...&postcount=393

CHANGELOG:

Kernel Update for v1.1 http://www.multiupload.nl/LM89AO62TG
Audio recording and video recording fixed
So now we can use VoIP applications on wave with Wi-Fi
Audio in call is still broken
Big thank to Rebellos. i just found good topic on ALSA forum with solution and Rebellos implemented solution

v1.1 http://www.multiupload.nl/H0THJFGQAQ
CM sources of 14.08.2013
Fixed vibrator (Thanks to Rebellos)
Fixed ENDCALL button behavior(Forgot to include it in v1)

v1 http://www.multiupload.nl/KT7LG7HXDJ
Initial release
CM sources of 8.08.2013
Update compared to Rebellos CM10 ROM http://forum.xda-developers.com/show....php?t=1851818
- Android 4.2.2 CM10.1 based
- Updated to linux kernel version 3.0.86
- ROW i/o scheduler
- 272 MB RAM
- F4k 720p patch for bigmem kernels (Video Fix)
- New key mapping
- Navigation bar activated

THANKS TO
Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen and many others.
CyanogenMod team for base ROM
Paulk and Replicant project for good base for bada-modem RIL
and many other who help us.